After many successes with the Predator Jet, we decided to develop a NEW sportjet for a new era. The Pilot-RC Matrix is an innovative approach to a new sport jet/3D jet. Great capabilities had to be combined between a sport jet and unbeatable 3D performance. We tested and learned everything aerodynamic from the Predator and developed it together with one of the best pilots in the world for Matrix performance, so we can say this is the best sport jet ever with ultimate flying characteristics for precise aerobatics and 3D aerobatics at the same time.
The Matrix's features and airframe shape are from one of the best designers, Mirco Pecorari from Aircraftstudiodesign, a little like the charismatic hypercar style.

SPECIFICATIONS:

FEATURES:

• Extremely lightweight full composite construction especially designed for outstanding sport flight
• Painted outside the mold so no seam lines
• Ultra lightweight landing gear, 1.8m Predator sport jet landing gear can also be used on the Matrix.
• Specially designed easy access to turbine for speedy installation
• Field setup can be done in seconds, thanks to the quick releases on the wings without the need for any tools.
• The single elevator clamp from the top, only a few turns to tighten/loosen the bolt then you can install/remove the stabilizer.
• Removable wing and elevator for easy transport
• The equipment installation board makes for a very clear installation of electronic items. Most of the wires can be hidden.
• Pre-installed tube for the stab/rudder extension wire, easy to install.

INCLUDED HARDWARE:

• Complete airframe (including carbon wing-tubes and pre-installed and painted fiberglass control horns)
• Servo extension leads
• Normal tail pipe
• 2,000ml fuel tank (optional upgrade to fuel bag)
• 250ml UAT tank
• Pre-prepared pushrods with ball links
• Servo connector brackets

REQUIRED HARDWARE:

Turbine size:

• 060-100N

Servos: Total x8 medium servos (size: 35x15x30mm), the flaps and rudder can also install standard servos.
x2 for flaps (minimum 16kg)
x1 for rudder (minimum 16kg)
x2 for ailerons (minimum 16kg)
x2 for elevators (minimum 16kg)
x1 for steering (minimum 10kg)

Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.

The CG is 196mm back from the leading edge of the wing at the fuselage
Measured with empty main tank, full UAT, landing gear down.

Photo is from 2.2 Matrix, the only difference is the canopy of the 1.8 Matrix will not be carbon color

Manual HERE