2.2m F86D Jet  with tail pipe, UAT, Kevlar fuel tank, fuel dot, fuel tank vent, servo extension wire, hardware. Gear door preisntalled.  Without retract gear. No speed brake. No wing drop tank. No Cockpit Set
 

SPECIFICATIONS:

FEATURES:

• Full scale detail with rivets panel lines, simulated hatches, etc…
• Full composite construction, lightweight and strong 
• Two piece wing and two piece full flying stabiliser, all for easy transport
• Painted outside the mold so no seam lines
• Fully hidden linkages, no horn, servo arm, ball links or pushrods exposed
• Screwless detachabe nose / radar cover.

INCLUDED HARDWARE:

• Complete air frame (including aluminium wing-tubes and fibreglass control horns)
• Servo extension leads
• Dual wall tail pipe (for 100-160N turbines)
• Kevlar fuel tank (4200ml) and UAT (250ml)
• Pre-prepared pushrods with ball links
• Pre-glued control horns

OPTIONAL EXTRAS:

• Pilot-RC electric landing gear and brake set
• Wing drop tank
• Smoke system (includes kevlar tank, smoke pump, injection pipe and fuel tubing)
• Speed brake (requires two additional servos)
• Scale cockpit (minus pilot)
• Wing bags

ALSO AVAILABLE:

Landing gear combo.  Includes Pilot-RC F86D kit, gear door installed, and Pilot-RC electric landing gear and brakes set. 
Requires servos and turbine of choice

Turbine Ready – Sport-scale version.  Includes all the above, plus x10 Pilot-RC servos and 4in1 connectors for aileron/flap/brake/retract, all pre-installed. 
Requires your own turbine of choice.

Turbine Ready – Pro Scale version. Includes all the same as the standard Turbine Ready version, plus all the Optional Extras preinstalled. This includes Wing drop tank, smoke system, speed brake with servos, scale cockpit and wing bags, all preinstalled.
Requires your own turbine of choice

REQUIRED HARDWARE:

Turbine: 100-160N 

Servos: (x13 + 2 optional)

x7 super high torque (minimum 35kg) // Uses x1 per flap, x1 per elevator, x1 on rudder

x2 high torque (minimum 20kg) // Uses x1 per aileron

x4 middle size servo, 35 x 15 x 30mm // Uses x3 for gear doors and x1 for steering

+2 super high torque (minimum 35kg) if installing Speed Brake

Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.