DLE-30 two stroke engine
Specifications:
Displacement: 30.5 cc (1.861 cu in)
Bore: 1.42 in (36 mm)
Stroke: 1.18 in (30 mm)
Weight: 2.4 lb (1.10 kg)
RPM Range: 1,600-8,500
Output: 3.7 hp @ 8,500 rpm
Requires: unleaded gasoline, oil, ignition battery & propeller
Includes: electronic ignition, muffler, spark plug, gasket, bolts, machined aluminum standoffs, throttle arm extension & manual
Suggested Propellers: 18x8, 18x10, 19x8 & 20x8
Suggested Break-in Prop: 18x8

Technical Data:
Ignition Battery: 4.8-6.0V NiCd or NiMH, 6.6V LiFe or 7.4V LiPopack (Voltage regulator required with LiPo or LiFe use.)
Compression Ratio: 7.6:1
Gasoline/Oil Mix: 30:1
Replacement Spark Plug: DLEG3526
Weight Breakdown: Engine: 32.1 oz (910 g); Muffler: 2.1 oz (60 g); Ignition: 4.2 oz (120g)
 

in stock

DLE 55 Gasoline Powered model airplane Engine with Electronic Ignition.

 

FEATURES

Two crankshaft bearings-simple design for lighter weight
Aluminum alloy crankcase
Four petal V-type reed valve bottom induction system
DLE carburetor
Fully automatic electronic ignition

 

INCLUDES

Engine, spark plug, standoffs, ignition, muffler, instruction manual

 

 

REQUIREMENT

2-cycle oil, mix ratio for this engine is 30 parts gas to one part
oil and must be followed exactly for warranty consideration
and optimum performance
4.8 - 6V NiMH/NiCd, or 6.6V LiFe or 7.4V LiPo battery for ignition
(separate receiver style pack can be used) (LiPo & LiFe requires
voltage regulator)
Propeller and field equipment

 

 

SPECIFICATIONS DLE 55

Output Power: 5.5 HP at 7,500 RPM
Best Performance RPM Range: 1,350 - 8,500
Maximum RPM: 8,500
Static Thrust: 14.2kg Pulling Force/100 meters altitude
12.5kg Pulling Force/1,800 meters altitude
Displacement: 3.4cu in (55.6cc)
Bore: 45mm
Stroke: 35mm
Compression Ratio: 7.6:1
Weight: Engine, 2.9lbs (1310g)
Muffler, 3.5oz (100g)
Ignition, 3.9oz (110g)
Gasoline/Oil Mixture: 30:1
Gasoline Octane Rating: 87
Recommended Propellers: 22x8, 22x10, 23x8, 23x10
Spark Plug: CM6
Distance Between Mounting Hole Centers Same Side: 2.7" (68mm)
Distance Between Mounting Hole Centers Opposite Side: 3.1" (80mm)
Height from bottom/Crankcase to top of Cylinder Head: 6.4" (162mm)
Width of Cylinder Head: 3.1" (78.8mm)
Length from Carburetor to Prop Washer: 6.2" (157mm)
Length from Carburetor to Front Bearing: 5" (127mm)
Distance Between Muffler Mounting Hole Centers: 1.6" (40mm)
Crankshaft Thread: 5mm/.8 pitch course thread

in stock

DLE111 2 stroke model airplane engine

Output Power: 11.2HP at 7500rpm (11.2HP/7500rpm)
Idle Speed: 1400 rpm
Static Thrust: 25.5kg at 100 meters altitude; 22.3kg at 1800 meters
Displacement: 111.2cc
Compression Ratio: 7.6:1
Net Weight: 2500g
Gross weight: 2870g
Type of the sparking plug ： CM6
Ratio of lubricating capacity: 30:1
Recommended prop size: 27×10； also you can try 26×12；28×10.



 

    in stock

DLE170 2 stroke model airplane engine

Performance:
17.5HP/9000rpm
Idle Speed: 1100 rpm/min
Static Thrust 35Kg / 100 meters Altitude
Static Thrust 31.5Kg / 1800 meters Altitude
The specification of the aircraft propeller: 30 X 12; 32 X 10
the type of the sparking plugFNGK CM6

Parameter:
Exhaust Amount: 170cm3
diameter × stroke: 52mm×40mm
Ratio of compression: 9.5F1
Ratio of lubricating capacity: 30:1
Weight: Main engine - 3550g Exhaust pipe - 200g X 2
Ignition equipment - 160g
Manual: HERE
 

in stock

Size 15mm

in stock

6mm plastic wing bolt Pilot rc planes
For all Pilot rc 20cc-200cc planes

DLE30/35R/40 Drill Guide

in stock
 

0.35mm² cross section Lenghts 40cm/120cm Heavy-duty insulation of soldered joints Excellent long-term functional properties Soldered joints immune from oxidation Vibration protection Kink protection Resistant to chemical influences Temperature-resistant from -30°C to +90°C

	Product description Premium servo cable is manufactured specially for PowerBox Systems. This cable is extremely flexible, and is made up using very thin individual strands in order to pass the maximum current through the given cross-sectional area of 0.35mm². The insulation is made of a special material which is also employed in full-size aviation. It is virtually indestructible, and offers excellent protection even when reduced to just a thin film around the copper conductor.   This insulation produces a weight reduction of about 30% compared with the conventional PVC. For comparison: in spite of its larger cross-section, the 0.35 mm² Premium cable offered here is lighter than standard 0.25 mm² PVC cable ! The insulation is fire resistant, and its heat resistance is much higher than the usual PVC.

 

 

In stock
 

PowerBox Smokepump
	the world's most successful smoke pump over the last three years motor and electronics protected in a robust, sealed case pump and electronics developed in-house by PowerBox Systems pump and electronics produced in our own factory extremely durable, effectively sealed metal geared pump variable flow capacity, adjustable from 0% to 100% adjustable to suit any engine and exhaust system the high maximum pumping rate of 750 ml / min. is adequate even for model jets no additional accessories or valves required available in two electronic versions: ffor direct connection to any PowerBox power supply system, or for use with an external battery, if the model is fitted with a different power supply system Quique Sommenzini has been using the system in his models for a year, and is convinced: ”The best pump I've ever seen!” Materials used in the pump: Pump case and cover made of Al Zn Mg Cu, 1.5, approved for use in highly stressed components in full-size aircraft, Brinell hardness rating 140. Gears made of Ms 58 / CuZn 40 / Pb 2, floating suspension in the pump (no press-fit), Brinell hardness rating 95. Du Pont Viton gaskets, safe up to +200°C, resistant to all hydro-carbons Accessories supplied as standard two patch-leads for power supply and pump control Y-piece (distributor) heat-resistant, fabric-sheathed rubber hose for connection to silencer

 

Specifications:

Model:	Decathlon – 28%
Wingspan:	107″ (2.700mm)
Length:	74″ (1.890mm)
Wing area:	1,913 “² (12,344 cm²)
Weight:	19.36lbs (8.8kg)

 FEATURES:

• Strong yet light weight design, good for acrobatic  flying and can even hover!
• Genuine German Oracover (Ultracote) covering
• Fast to put together at the field
• Highly prefabricated, experienced builders can have air ready in under a day
• Pre-installed hinges (glued and pinned)
• Internally mounted cowling – so no external screws exposed
• Removable rudder (as well as removable wings and stabs)
• Laser engraved motor mounting position and multiple servo locations available for Rudder setup (pull pull or direct push pull)

Included hardware:

• Complete air frame with all basic accessories (such as carbon fibre main undercarriage, tail-gear assembly and wing-tubes as well as fibreglass control horns and wheel pants)
• Pre-installed hinges and pre-mounted canopy
• Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
• Wheels, axels and wheel pants
• Pre-preared pull-pull wires and pushrods with ball links
• Matching carbon spinner

Required hardware:

Motor: 30-60cc or equivalent electric

Servos: 7-8 high torque (minimum 20kg) plus throttle // Uses x1 per aileron, x1 per flap, x1 per elevator and x1 or x2 on rudder

Also requires all the usual accessories such as transmitter, receiver, propeller, batteries, powerbox, extension leads and possibly other small accessories.

in stock

Gasket DLE55,111 exhaust

Ignition DLE111

No stock

carburator DLE111

DLE20 2 stroke model airplane engine

Specifications:
Displacement: 20 cc (1.22 cu in)
Bore: 1.3 in (32 mm)
Stroke: 1.0 in (25 mm)
Weight: 28.9 oz (820 g)
RPM Range: 1,750-9,000
Output: 2.5 hp @ 9,000 rpm
Requires: unleaded gasoline, 2-cycle oil, ignition battery & propeller
Includes: electronic ignition, muffler, spark plug, gasket, bolts, throttle arm extension & manual
Suggested Propellers: 14x10, 15x8, 16x6, 16x8, 17x6
Suggested Break-in Prop: n/a

Technical Data:
Ignition Battery: 4.8-6.0V NiCd or NiMH, 6.6V LiFe or 7.4V LiPo pack (LiPo use requires voltage regulator.)
Compression Ratio: 10.5:1
Gas/Oil Mix: 30:1
Replacement Spark Plug: NGK CM6 (DLEG5510) or equivalent
Weight Breakdown: Engine: 22.9 oz (650 g); Muffler: 1.8 oz (50 g); Ignition: 4.2 oz (120 g)   

 


 

DLE222 2 stroke 4 cilinder model airplane engine
Specifications:
Displacement: 13.6 cu in (222.5 cc)
Bore: 1.77 in (45 mm)
Stroke: 1.38 in (35 mm)
Weight: 12.37 lb (5.61 kg)
RPM Range: 1,000-7,500
Output: 21.5 hp @ 7,500 rpm
Requires: unleaded gasoline, oil, two ignition batteries & propeller
Includes: Dual electronic ignition, mufflers, spark plugs, gaskets, bolts, machined aluminum standoffs & throttle arm extension
Suggested Propellers: 32x10, 32x12 & 34x10

Technical Data:
Ignition Battery: two 4.8-6.0V NiCd or NiMH, 6.6V LiFe or 7.4V LiPo Packs (LiPo use requires voltage regulator.)
Compression Ratio: 7.6:1
Gas/Oil Mix: 30:1
Replacement Spark Plug: NGK CM6 (DLEG5510) or equivalent


 

Pilot rc main wing horn/ tail wing horn, set.

in stock

in stock

in stock

in stock
10pcs

in stock
10pcs

in stock
10pcs

in stock
10pcs

in stock

in stock

in stock

in stock

DLE35RA 2 stroke model airplane engine
Producing 400 more rpm than the DLE30

Specifications:
Displacement: 34.9 cc (2.13 cu in)
Bore: 1.5 in (38.5 mm)
Stroke: 1.17 in (30 mm)
Weight:
      Engine: 2.06 lb (936 g)
      Muffler: 2.61 oz (74 g)
      Ignition Module: 5.26 oz (149 g)
Total Weight: 2.77 lbs (1.26 kg)
Output: 4.1 hp @ 8,500 rpm
Requires: Unleaded gasoline, oil, ignition battery & propeller
Includes: Electronic ignition, muffler, spark plug, engine standoffs, integrated choke rod guide & rear-mounted carb
 

• Suggested Propellers: 18x10, 19x8, 20x8 & 20x10

 

In stock


DLE55RA 2 stroke model airplane enigine
 

DLE takes 50cc performance to a new level with the rear exhaust DLE-55RA. Everything about this engine screams performance, from the piston skirt - designed to be lightweight for quick throttle response and tons of power - to the rear exhaust that lets you easily install a tuned pipe in your aircraft. The 55RA provides 100 more rpm than the standard DLE-55. It includes engines standoffs, electronic ignition, spark plug and Pitts style muffler.

Performance :	5.5HP/8500rpm
Idle Speed :	1500 rmp/分钟
Static Thrust :	14.5kg/100 meters  Altitude
Static Thrust :	12.8kg/1800 meters  Altitude
Recommended Propeller :	22x8 ; 22x10 ; 23x8 ; 23x10 ;
Spark Plug Type :	NGK CM6

Displacement :	55.6cm3
Diameter × Stroke :	45mm×35mm
Compression Ratio :	7.6 ：1
Lubrication Ratio :	30:1
Weight of Main Engine :	1330g
Weight of Exhaust :	150g
Weight of Ignition :	140g
Ignition voltage：	4.8V-8.4V

 

in stock

DLE-60 2 stroke twin engine

Specifications:

Performance :	7HP/8500rpm
Idle Speed :	1400 rmp/min
Static Thrust :	15.2kg/100 meters  Altitude
Static Thrust :	13.5kg/1800 meters  Altitude
Recommended Propeller :	22x10 ; 23x8 ; 23x10 ; 24x8 ;
Spark Plug Type:	NGK CM6

Displacement :	61cm3
Diameter × Stroke :	36mm×30mm
Compression Ratio :	7.6：1
Lubrication Ratio :	30:1
Weight of Main Engine :	1560g
Weight of Exhaust:	200g
Weight of Ignition:	190g
Ignition voltage :	4.8V-8.4V

Requires: Unleaded gasoline, oil, ignition battery & propellers
Includes: Electronic ignition, mufflers (2), spark plug & engine standoffs
 

Perfect connection between fuselage and wing for 3 servos 2 x 0.5mm²,1 x 0.3mm², wire lenght 200 cm

Features

• 2 x 0.5mm²,1 x 0.3mm² cross section
• Wire lenght 200 cm
• Heavy-duty insulation of soldered joints
• Excellent long-term functional properties
• Soldered joints immune from oxidation
• Vibration protection
• Kink protection
• Resistant to chemical influences
• Temperature-resistant from -30°C to +90°C

Product description

The Premium™ MAXI servo cable is manufactured specially for PowerBox Systems. This cable is extremely flexible, and is made up using very thin individual strands in order to pass the maximum current through the given cross-sectional area of 2 x 0.5mm², 1 x 0.3mm². The insulation is made of a special material which is also employed in full-size aviation. It is virtually indestructible, and offers excellent protection even when reduced to just a thin film around the copper conductor.

This insulation produces a weight reduction of about 30% compared with the conventional PVC.

For comparison: in spite of its larger cross-section, the 2 x 0.5mm², 1 x 0.3mm² Premium™ MAXI servo cable offered here is lighter than standard 0.25 mm² PVC cable !

The insulation is fire resistant, and its heat resistance is much higher than the usual PVC.

MPX female, wire 2,5mm², 30cm long

in stock

replacment landing gear for phantom
 

 

in stock


 

 

Specifications:

Model:	Decathlon – 28%
Wingspan:	107″ (2.700mm)
Length:	74″ (1.890mm)
Wing area:	1,913 “² (12,344 cm²)
Weight:	19.36lbs (8.8kg)

 FEATURES:

• Strong yet light weight design, good for acrobatic  flying and can even hover!
• Genuine German Oracover (Ultracote) covering
• Fast to put together at the field
• Highly prefabricated, experienced builders can have air ready in under a day
• Pre-installed hinges (glued and pinned)
• Internally mounted cowling – so no external screws exposed
• Removable rudder (as well as removable wings and stabs)
• Laser engraved motor mounting position and multiple servo locations available for Rudder setup (pull pull or direct push pull)

Included hardware:

• Complete air frame with all basic accessories (such as carbon fibre main undercarriage, tail-gear assembly and wing-tubes as well as fibreglass control horns and wheel pants)
• Pre-installed hinges and pre-mounted canopy
• Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
• Wheels, axels and wheel pants
• Pre-preared pull-pull wires and pushrods with ball links
• Matching carbon spinner

Required hardware:

Motor: 30-60cc or equivalent electric

Servos: 7-8 high torque (minimum 20kg) plus throttle // Uses x1 per aileron, x1 per flap, x1 per elevator and x1 or x2 on rudder

Also requires all the usual accessories such as transmitter, receiver, propeller, batteries, powerbox, extension leads and possibly other small accessories.
 

 

Wingspan:	122 in(3.1M)
Wing Area:	2488 sq in(16055 sq cm)
Fuselage length:	84.5 in(2.15M)
Weight:	24.70 lbs(11.2kg)
Engine:	50~85cc

Video: http://www.youtube.com/my_videos?feature=mhum

Features:

• Strong Light Weight Construction,  can hover with 50cc engine. 
• good for aerobatics
• Professionally covered in Oracover(Ultracote) from Germany
• Provision for 3 aileron servos per wing, 2 elevator servos per stab,  2 elevator servos for rudder.
• Cowl is factory mounted
• Canister tunnel fits most standard canisters
• Beautifully machined aluminum  wheels and rubber tires
• Axles and wheelcollars
•  Turnbuckle linkage and ball links
• Factory hinged ailerons and elevators.
• Removable rudder  
• Pull-pull rudder system and push push rudder system, you can choose what you like.
• quickly install in the field. less than 10minutes.  

• Flaps preinstall.  

Carbon Fiber accessories:

• painted CF Spinner, which is cut for a 2-blade propeller.
• Carbon Fiber landing gear
• CF tailwheel assembly
• Twin CF wing tubes
• Twin CF stab tubes

Wingspan:	122 in(3.1M)
Wing Area:	2488 sq in(16055 sq cm)
Fuselage length:	84.5 in(2.15M)
Weight:	24.70 lbs(11.2kg)
Engine:	50~85cc

 

Features:

• Strong Light Weight Construction,  can hover with 50cc engine. 
• good for aerobatics
• Professionally covered in Oracover(Ultracote) from Germany
• Provision for 3 aileron servos per wing, 2 elevator servos per stab,  2 elevator servos for rudder.
• Cowl is factory mounted
• Canister tunnel fits most standard canisters
• Beautifully machined aluminum  wheels and rubber tires
• Axles and wheelcollars
•  Turnbuckle linkage and ball links
• Factory hinged ailerons and elevators.
• Removable rudder  
• Pull-pull rudder system and push push rudder system, you can choose what you like.
• quickly install in the field. less than 10minutes.  

• Flaps preinstall.  

Carbon Fiber accessories:

• painted CF Spinner, which is cut for a 2-blade propeller.
• Carbon Fiber landing gear
• CF tailwheel assembly
• Twin CF wing tubes
• Twin CF stab tubes

In stock


Pilot-rc wingbag for 35cc model and ViperJet 1.8m & 2.0M 

in stock

Wing bag set pilot-rc 50-60cc models.
Color: red/black

in stock

pilot-rc wing bag for 100cc-120cc model
Color: red/black

in stock

T-Motor Brushless Motor MN2214 Antigravity - 920KV  V3.0

 
DJI Phantom upgrade motor set. (Also a good choise for the TBS Discovery with DJI E300 propellors)
-more power
-les vibriation
-longer lifetime
-longer flight times
 

in stock

This 5.8 receiver module is made specially for the Fatshark Dominator. Featuring custom, high-sensitivity 5.8 GHz receiver modules compatible with all 5.8 GHz systems sold to date. More specifically transmitters sold by HobbyKing, Foxtech, etc and out-of-the-box systems such as the SpyHawk FPV are supported, as well as all Airwave-compatible transmitters (e.g. ImmersionRC).

Note: compatibility with Airwave is provided, but the quality will not be desireable. We suggest the use of BOSCAM video transmitters.

Contents

• 5.8 GHz TBS Fatshark Dominator Receiver
• 5.8 GHz 5dbi RHCP Patch Antenna - designed by IBCrazy

Instructions

Place the module into your Fatshark Dominator receiver. Toggle between bands by pushing (and holding) the golden button. The receiver will display the currently active band with the LED.

1 flash = BOSCAM Band A
2 flashes = BOSCAM Band B
3 flashes = BOSCAM Band E
4 flashes = Airwave

Toggle channel within bands using the Fatshark channel select buttons.

Specifications

• 32 channels (4 Bands with 8 channels each)
• -90dBm sensitivity
• Works with all BOSCAM A/V transmitters (200mW, 400mW, 500mW)
• Works with Airwave transmitters (tested with the new ImmersionRC 600mW)*
• 3 - 5V operating voltage
• RP-SMA antenna connector
• Fatshark Dominator compatible, toggles channels using the Fatshark button!
• Can be installed into Fatshark Attitude goggles!

* Airwave frequency support is not full spec. Range is affected, as well as transmission picture quality! We highly recommend the use of BOSCAM transmitters.

Supported Frequencies

	BOSCAM A	BOSCAM B	BOSCAM E	Airwave
Ch1:	5865 MHz	5733 MHz	5705 MHz	5740 MHz
Ch2:	5845 MHz	5752 MHz	5685 MHz	5760 MHz
Ch3:	5825 MHz	5771 MHz	5665 MHz	5780 MHz
Ch4:	5805 MHz	5790 MHz	5645 MHz	5800 MHz
Ch5:	5785 MHz	5809 MHz	5885 MHz	5820 MHz
Ch6:	5765 MHz	5828 MHz	5905 MHz	5840 MHz
Ch7:	5745 MHz	5847 MHz	5925 MHz	5860 MHz
Ch8:	5725 MHz	5866 MHz	5945 MHz	5860 MHz

Band A: Team BlackSheep, RangeVideo, SpyHawk, FlyCamOne USA
Band B: FlyCamOne Europe
Band E: HobbyKing, Foxtech, etc
Airwave: ImmersionRC, Iftron

* Fatshark Dominator Goggles not included!

in stock

Extra 260 cowl 87" 2.2m

in stock

DLE61 stroke engine model airplane engine

 

Performance :	6HP/7500rpm
Idle Speed :	1400 rmp/min
Static Thrust :	15kg/100 meters  Altitude
Recommended Propeller :	22x10 ; 23x8 ; 23x10 ; 24x8 ;
Spark Plug Type :	NGK CM6

Displacement :	60cm3
Diameter × Stroke :	47mm×35mm
Compression Ratio :	10.5：1
Lubrication Ratio :	30:1
Weight of Main Engine :	1370g
Weight of Exhaust :	150g
Weight of Ignition :	140g
Ignition voltage :	4.8V-8.4V

 

Rcexl Opto Gas Engine Kill Switch

This device allows you to safely and remotely kill your electronic ignition equipped engine form your transmitter.
This kill switch is Fiber Optically Coupled to isolate your ignition system form your radio system.(No Interference!!)
-This device plugs into a spare receiver channel.
-This is a must have safety device for any gas powered plane!
-This device allows you to safely kill your engine at anytime(on the ground, or in the air!)
-Or when out of control also allows kill the enfine.

-Includes a remote mountable bright LED to indicate when the ignition is armed.
-Fiber Optic Coupled Input/output.
-PIC12F675 Controller.
-Li-Po/Li-ion/A123/Ni-Mh/NiCad Input.
-Up to 20 Volt 16 amp MOS-FET(IRF7456) output.
-Low to 3 Volt 3 amp OUTPUT.
-Low Voltage Drop-Less than 150mv.
-100% Surface Mount Technology.
-Heavy Gauge Wires, universal connectors.
-Small and light weight-only 0.3 OZ!(8g).
-Shut down the transmitter power or receiver to cut off automatically when kill engine.
 

in stock

Hand crank fuel pump by Q-Model, designed for both, glow and gas fuel

Includes:
-1 x pump
-1 x filter
-1 x fuel nozzle
-2 x self-tapping screws
-1 x 19 inch silicone tubing

Powerbox Premium™ servo leads
 

Features

• 0.35mm² cross section
• 30% weight saving
• only 11g/m
• fire resistant
• robust isolation
• employed in full-size aviation
• length 10meter

DLE120 2 stroke twin engine

DLE Series	DLE-120cc
Type	Gasoline Twin
Displacement	7.3 cu in (120cc)
Bore	1.85" (47mm)
Stroke	1.38" (35mm)
RPM Range	1,300 - 8,000
Output (HP/rpm)	12/7,500
Weight (engine only)	6.38 lbs. (2893g)
Crankshaft Thread	-
Propeller Range	26x10-28x10 (27x8 Suggested)
Included	Bolts, Mufflers, Instructions Electronic Ignition

In stock

 Futaba T18SZ Potless +R7008SB 2,4GHz FASSTest Mode 2

For many years Futaba have led the way with the ultimate in radio systems, and they have done it again with their new T18SZ.

Packed full of possibilities, the T18SZ includes a Li-Fe battery for extended run times, S-FHSS, T-FHSS, FASST and FASSTest transmission systems, 4.3" colour ultra quick response touch screen, flight conditions, a massive range of mixing and programming options for Aircraft, Gliders, Helicopters and Multirotors, Telemetry, Data Logging, etc, not to mention full 18 channel operation.

Supplied complete with the 8 18 channel R7008SB receiver, the T18SZ is the perfect radio for any serious pilot, and of course the regular software updates provided by Futaba will keep this superb radio up to date.

• Futaba 2.4GHz FASSTest, FASST, T-FHSS, S-FHSS Modulation
• 18 Channel (16 Linear + 2 Digital)
• 30 Internal Model Memory
• SD Card External Model Memory (SDHC is available.)
• Telemetry System (Details Below)
• Voice Message
• Easy Software Updates using SD card
• Stick Calibration
• Ultra-Fast 109mm (4.3") Colour TFT-LCD Touch Screen
• 2 Front Dials
• 2 Side Levers
• 6 Trim Levers
• 8 Toggle Switch
• Long life LiFe Battery (LT2F2100B)
• Antenna Angle Adjustment (90 degree and 3 step Rotation)
• Built-in Speaker
• Earphone Jack
• S.BUS I/F (with Power Supply)
• Trainer PPM 8CH / PPM 12CH / S.BUS (16CH)
• Trainer S.BUS Port
• Adjustable Angle Sticks
• Built-In Vibrator

Basic Program Features
• 15 Character User Names
• 15 Character Model Names
• Condition Name
• Function Setting
• Function Rename (AUX function only)
• Sub Trim (±240 steps)
• Servo Reverse
• Fail Safe
• Battery Fail Safe (All Channels on FASSTest/FASST-Multi/S-FHSS, 3 Channel FASST 7CH)
• EPA (30 - 140% with Limit setting)
• Servo Speed Adjustment
• Trim Setting (Step, Rate, Mode)
• Flight Condition (Maximum 8 conditions)
• AFR (D/R)
• AFR Curve Mode (3 Types)
• AFR Curve Point Number (Maximum 17 points)
• Programmable Mixing (10 per Condition)
• Throttle Cut
• Idle down
• Logic switch (Condition switch only)
• Data editor for S.BUS equipment
• Servo Monitor (with NT and Moving Test)
• 2 Up/Down Timers
• Integral Timer (System Timer)
• Model Timer
• Stick Alarm

Aircraft
• 13 Wing Types
• 3 Tail Types
• 2 Rudder Types
• Flap Settings
• AILE Differential
• AILE to Camber FLAP Mix
• AILE to Brake FLAP Mix
• AILE to RUD Mix
• AIRBRAKE to ELEV Mix
• RUDD to AILE Mix
• RUDD to ELEV Mix
• Camber Mix
• ELEV to Camber Mix
• Camber FLAP to ELEV Mix
• Snap Roll
• Airbrake Mix
• V-Tail
• Ailvator
• Winglet
• FLAPERON Mix (use Camber Mix)
• ELEVON Mix (use Camber Mix)
• Motor Mix
• Multi Engine
• Gyro Sense
• THR Curve (Using AFR)
• PIT Curve (Using AFR)

Helicopter
• 8 Swash Types (H-1, H-2, H-3, HR3, HN3, HE3, H-4, H4X)
• Pitch / Throttle Curve
• 3 Pitch / Throttle Curve Modes
• Pitch / Throttle Curve (Maximum 17 points)
• Acceleration
• Throttle Hold
• Swash Mixing
• Throttle Mixing
• PIT to NEEDLE Mixing
• PIT to RUD Mixing
• Gyro Sense (3-axis is available)
• Governor
• Condition Hold
• Hovering Pitch
• High / Low Pitch
• Hovering Throttle
• Swash AFR
• Swash Setting (Mixing Rate, Linkage Compensation, Speed Compensation)
• Swash Ring
• Throttle Limiter

Glider
• 13 Wing Types
• 3 Tail Types
• 2 Rudder Types
• Flap Settings
• AILE Differential
• AILE to Camber FLAP Mix
• AILE to Brake FLAP Mix
• AILE to RUD Mix
• RUDD to AILE Mix
• AIRBRAKE to ELEV Mix
• Camber Mix
• ELEV to Camber Mix
• Camber FLAP to ELEV Mix
• Butterfly Mixing
• Butterfly to ELEV (ELEV rate in Butterfly Mix)
• Trim Mix 1
• Trim Mix 2
• V Tail Mix
• Ailvator Mix
• Winglet Mix
• Flaperon Mix (Using Camber Mix)
• Elevon Mix (Using Camber Mix)
• Motor Mix

Telemetry Options
• Receiver Battery
• Temperature Sensor
• RPM Sensor (Magnetic)
• RPM Sensor (Optic)
• Altitude Sensor (with Vario)
• GPS Sensor (Included Altitude Sensor)
• Voltage Sensor
• Current Sensor
• Voice
• Data Logging

no stock
 

Electric landing gear for Dolphin jet 78"/86"
Working voltage 7.4V

In stock

Futaba T10J-R3008SB 2,4 GHz T-FHSS M2 EU NEW model

The new Futaba 10J radio utilises the very latest T-FHSS transmission technology to offer a full 10 channel system combined with sophisticated telemetry, the telemetry transmission of the signal strength, receiver battery voltage and external battery voltage being built-in to the matching R3008SB receiver, whilst further sensors from Futaba’s wide range can be added as required. As standard the telemetry data is displayed on the 10J’s large LCD screen, but audio output is also available via an earphone (not supplied). This extremely sophisticated system is supplied complete with transmitter battery and delta peak charger as well as the full range R3008SB receiver which has 8 conventional outputs, or a full 10 through the S-Bus or S-Bus 2 outputs, the 10J also including an S-Bus servo programming function. With no less than 30 model memories, the 10J also features a model memory transfer function, where a model memory can be wirelessly transferred to or from another 10J transmitter, or from an 8J, a real boon for those with multiple models/transmitters. As the 10J also includes S-FHSS transmission, all of the current FHSS air receivers can be used, ranging from the micro 6 channel R2106GF through to the 8 channel R2008SB. The 10J has extremely powerful mixing functionality, with 16 aircraft, 17 helicopter and 13 glider mixes being built-in, but on top of this there are six freely programmable mixers.

• 30 Model Memory
• Telemetry of signal strength, Rx battery voltage and external voltage as standard
• Wide range of optional telemetry sensors available
• Large 128 x 64 dot LCD w/LED Backlight
• T-FHSS and S-FHSS transmission modes
• Aircraft, Helicopter and Glider mixing functions
• S-Bus/S-Bus 2 servo programming function
• Model Memory transfer function
• Telemetry audio via earphone (earphone not included)
• Rechargeable Tx Battery and Charger
• Alarm/Warning function
• Two circuit Timer
• Auxiliary Channels Selectable
• Six Programmable Mixers
 

---

Die ideale Anlage für Fortgeschrittene zur Steuerung von Flug-, Hubschrauber und Multicopter - Modellen, die Wert auf ein präzises Steuergefühl legen.
Die T10J ermöglicht mit Ihren äußerst umfangreichen Funktionen auch anspruchsvolle Anwendungen und lässt in Sachen Programmierbarkeit nahezu keine Wünsche offen.

Erste RC-Anlage mit eigenständigem Multicopter-Modellmenü und speziellen Mischfunktionen.

Das ergonomisch durchdachte Sendergehäuse mit bekannter Futaba Verarbeitungsqualität liegt gut in der Hand und zeichnet sich durch griffgünstig angeordnete Bedienelemente aus.
Ein 128 x 64 Pixel großes, beleuchtetes LC-Display, mit großen Bildpunkten sorgt für gute Lesbarkeit bei allen Lichtverhältnissen.
Die grafisch geführte Benutzeroberfläche, mit der bekannt einfachen Futaba-Menüstruktur, sorgt für eine leichte Bedienung - die Menüführung kann in 7 Sprachen gewählt werden. Das intuitiv zu bedienende 3D-Hotkey-System erlaubt eine schnelle und einfache Navigation in der Menüstruktur und eine leichte Einstellung aller Parameter.

• T-FHSS® 2,4 GHz Technologie
• Hohe Störsicherheit durch schnelle Frequenz Hopping Modulation (100 x pro Sekunde.)
• Integriertes 32-Kanal Telemetrie System mit hoher Reichweite
• Telemetrie-Echtzeitanzeige in großem Display
• Sprachausgabe über optionalen Kopfhörer mit 3,5 mm Klinkenstecker
• Melodie- und Tonausgabe (wahlweise über internen Beeper oder optionalen Kopfhörer)
• Vibrationsalarm
• 65 x 34 mm großes, beleuchtetes Display (128 x 64 dot)
• S-BUS Technologie für volldigitale Einbindung von S.BUS-Servos, S.BUS-Reglern und S.BUS-Sensoren
• Durch S.BUS Unterstützung ideal für Helicopter mit S.BUS Flybarless-Systemen
• Integrierte Patch-Antenne sorgt immer für optimale Antennenabstrahlung
• Vollausgebauter 10-Kanal-Sender mit 19 Bedienelementen
• Präzise, spielfreie Steuerknüppel mit Open-Stick-Mechanik
• Die Steuerknüppelmechanik für Universalmode (Mode 1 und 2), kann vom Anwender umgestellt werden.
• Lieferumfang mit NiMH-Akku sowie Ladegerät.

Übertragung
• 10 Propkanäle
• Umschaltung von T-FHSS (10 Kan) auf S-FHSS (8 Kan) - Modulation.
• T-FHSS® Frequenz-Hopping Technologie mit integrierter Telemetrie
• Eine weite Kanalspreizung ergibt hohe Störsicherheit und ultraschnelle Reaktionszeiten für ein präzises, direktes Steuergefühl.
• FEC- Technik, die T-FHSS® Empfänger scannen das Eingangssignal permanent und wenden ein intelligentes Fehlerkorrektur-Verfahren an
• 100mW Sendeleistung
• Kein Reaktionsgeschwindigkeitsverlust auch bei stark belegtem Frequenzband
• Real-Time-Response – Echtzeitsteuerung
• Hervorragende Reichweite
• Ultraschnelle, direkte, durchgängig digitale Modulation für kürzeste Reaktionszeiten
• Easy Link - äußerst einfaches, schnelles Bindingverfahren zwischen Sender und Empfänger
• Schnelles und sicheres automatisches Re-Binding auch unter schwierigen Bedingungen
• Intelligentes Servo-Timing zur gleichmäßigen Servoansteuerung und Verhinderung von Servolaufzeitunterschieden
• Dual Antenna Diversity – blitzschnelles Umschalten zwischen zwei Empfangsantennen für optimale Empfangssignalqualität (je nach Empfänger)
• Integrierte Reichweitentestfunktion zur Überprüfung der Reichweite vor dem Start

Telemetrie
• Synchronisierte, bidirektionale Kommunikation zwischen Sender und Empfänger mit hoher Telemetrie Datenrate (bis zu 9 mal pro Sekunde)
• 32 Telemetrie Kanäle
• Hohe Telemetrie-Reichweite
• Echtzeitanzeige der Telemetriedaten auf integriertem Display
• Sprachausgabe über optionalen Kopfhörer mit 3,5 mm Klinkenstecker
• Melodie- und Tonausgabe (wahlweise über internen Beeper oder optionalen Kopfhörer)
• Vibrationsalarm
• Empfänger-Unterspannungswarnsystem zur Überwachung des Empfängerakkus
• Frei konfigurierbare Ausgabe der Telemetriedaten über Display, Ton, Sprache und Vibration.
• Kompatibel mit allen Futaba Telemetriesensoren Ergonomie
• Präzisionssteuerknüppel für genaue und feinfühlige Steuerung
• Die "Open-Stick" - Mechanik der Steuerknüppel ist speziell gelagert und nahezu spielfrei
• 65 x 34 mm großes beleuchtetes Display (128 x 64 dot‘s) mit hohem Kontrast für beste Ablesbarkeit auch bei starkem Sonnenlicht
• Grafische Bedienoberfläche und intuitiver 3-D Hotkey zur einfachen Bedienung aller Funktionen • 7 Sprachen zur Auswahl : Deutsch, Englisch, Französisch, Italienisch, Spanisch, Japanisch oder Holländisch
• Einheitliche, intuitive Futaba-Bedienungsführung für einfachen Umstieg
• Bedienelemente weitgehend frei zuordenbar
• Vollständig ausgebaut mit 19 Bedienelementen
• Mode 1-4 umschaltbar Lehrer-/Schülerfunktion
• wahlweise mit optionalem Kabel oder drahtlos per Funkmodul oder S.BUS-Empfänger
• mit Einzelfunktionsumschaltung (Lehrer kann einzelne Funktionen dem Schüler freigeben) und Mix-Betrieb (Lehrer kann alle Funktionen übersteuern)

S.BUS-Technologie
• Digitale BUS-Technologie für den Modellsport
• Zukunftsweisender serieller Steuerbus
• Volldigitale Einbindung von S-BUS Komponenten wie S.BUS Servos, S.BUS-Reglern und S.BUS-Sensoren
• Der 8-Kanal T-FHSS Empfänger besitzt 8 PWM Ausgänge sowie einen digitalen S.BUS-Anschluss, für S.BUS-Servos, S.BUS-Regler als auch Telemetriesensoren.
• S.BUS1 und S.BUS2 (bidirektional) kompatibel
• Erlaubt ideale Platzierung aller Komponenten mit effizienter Verkabelung
• Zukunftssichere digitale Technologie für alle künftigen Futaba-Komponenten
• S.BUS-Komponenten können direkt über den Sender programmiert und angemeldet werden
• Serielles digitales Signal, ideal für Flybarless-Systeme, Kreisel und Akkuweichen Funktionen - Allgemein
• 30 interne Modellspeicher
• Modellspeichertransfer per Funk der T10J Sender untereinander oder von T8J auf T10J.
• Grafischer Servomonitor zur übersichtlichen Anzeige aller Servowege mit Servotestfunktion
• Weiter Empfängerspannungsbereich von 3,6V bis 8,4V für flexible Auswahl des Empfängerakkus • Zukunftssicher durch Softwareupdatefähigkeit über optionalen CIU-2 Adapter.
• Mischermenüs zur Programmierung aller Servos und Mischfunktionen je nach Modelltyp
• Modelltypabhängige Spezialmischprogramme für:
- Motormodelle (2…4 Klappen)

Multikopter Modelle
• Seglermodelle (2…6 Klappen)
• Hubschrauber (8 Taumelscheibentypen)
- mehr Informationen siehe „Funktionen im Detail“
• 5 Flugzustände (Helimenü und 3 Flugzustände im Glidermenü) für jeden Modellspeicher frei programmierbar zur optimalen Einstellung jedes Flugzustandes
• Programme für alle Leitwerkstypen: Normal, V-Leitwerk, Delta, Nurflügler, getrennte Höhenruder (Ailvator)
• Servowegeinstellung für alle Propkanäle
• Servoumpolung und Mittenverstellung der Kanäle 1…8
• Digital-Trimmtaster - Trimmwertspeicherung, bei Modellspeicherwechsel, überflüssig.
• Trimmwertanzeige im Home Menü • Failsafeeinstellung und Battery-Failsafe-Einstellung
• 2 Betriebsstundenzähler, davon einer modellspeicherbezogen
• 2 freie einstellbare Stoppuhren Softwareliste Basisfunktionen:
• Alarm, Mischer, Unterspannung, Timer
• Modellwahl, 30 Modellspeicher, Modell Kopie
• Lehrer-Schüler-Betrieb, mit Einzelfunktionsübergabe und / oder Mix-Betrieb.
• Stick Mode 1...4
• Drossel Funktionsumpolung
• Mehrsprachige Sendersoftware
• Betriebsstundenzähler
• Reichweitentest-Modus
• Benutzername (10 - Zeichen)
• Digitale Betriebs-Spannungsanzeige

Modellfunktionen
• Modellname (10 - Zeichen)
• Servoumpolung Kanal 1…8
• Failsafe (Kanal 1…8)
• Servowegeinstellung (ATV/EPA)
• Servomittenverstellung (Subtrim)
• Trimmwertspeicher
• Trimmschritt-Einstellung
• Drosselabschaltung
• Freie Kanalwahl (5…10) und Geberwahl
• 2 Auf- / Abwärtszählende Stoppuhren
• Model-Timer
• Digitale Steuerknüppeltrimmung mit Schritteinstellung
• Leerlauftrimm mit Umpolung (ATL)
• Reset

Flugmodell:
• 3 x Steuerweg-Umschaltung (D/R)
• 4 x Exponentialfunktion (EXP)
• 6 Programm Mischer, mit Offset-Zumischung (4 x Linear, 2 x 5 Punkt)
• Flaperon - Mischer mit Differenzierung
• Flaperon - Trim (Mischwert Flaperon)
• V-Leitwerksmischer (V-Tail)
• Delta-Mischer (Elevon) mit Differenzierung
• Quer -> Seitenruder • Höhenruder -> Flaperon
• Flaperon -> Höhenruder
• Air-Brake (Querruder als Wölb-/Bremsklappen)
• Ailvator-Mischer (Quer-Höhe)
• Snap-Roll
• Kreiselmischer (2/3 Raten)
• Gaskurve
• Propeller Pitch
• Gas-Verzögerung
• Leerlauf 2
• Mischer Gas-Nadel
• Modelltypauswahl

Hubschraubermodell:
• 3 x Steuerweg-Umschaltung (D/R)
• 4 x Exponentialfunktion (EXP)
• 6 Programm Mischer, mit Offset-Zumischung (4 x Linear, 2 x 5 Punkt)
• 5-Punkt Gaskurve, Normal, Gasvorwahl 1, 2 und 3
• 5-Punkt Pitchkurve, Normal, Gasvorwahl 1, 2, 3 und Autorotation
• Gas Trimmung Schwebeflug (Mix-Regler)
• Pitch Trimmung Schwebeflug
• Einstellmenü für Kreiselempfindlichkeit
• Offset-Mix (Roll-Nick-Heck), alle FZS
• Autorotation mit Heckrotoroffset
• Pitch -> Heckrotormischer
• Mischer Taumelscheibe-Gas
• Einstellmenü Governor (Drehzahlregler)
• Taumelscheibenwegeinstellung (AFR für Roll-Nick-Pitch)
• H1, H2, H3 (1:1:1), H4, HR3, HE3, HN3, H4X Taumelscheibenansteuerung
• Einstellung Pitch Min. und Max.
• Mischer Gas-Nadel
• Taumelscheibenringmischer
• Taumelscheibenmix-Menü

Segelflugmodell:
• 3 x Steuerweg-Umschaltung (D/R)
• 4 x Exponentialfunktion (EXP)
• 6 Programm Mischer, mit Offset-Zumischung (4 x Linear, 2 x 5 Punkt)
• Quer-Seite
• Seite-Quer
• Wölbklappen
• Klappen-Mischer
• Butterfly und Butterfly-Höhe
• Wölb –Höhe
• Höhe-Wölb
• Quer-Wölb
• Quer-Bremsklappen
• V-Leitwerk
• Motor
• Kreiselmischer
• Modelltypauswahl


Lieferumfang
• 1 Sender T10J 2,4 GHz T-FHSS
• 1 Empfänger R3008SB 2,4 GHz T-FHSS
• 1 Senderakku 4NiMH 1200 mAh
• 1 Steckdosenlader Tx-Rx 600 mA
• 1 Schalterkabel mit Ladebuchse
• 1 deutsche Bedienungsanleitung                                

   

in stock

UHU POR 40gr

no stock

Powerbox JR connector female 10pcs

Powerbox JR servo connector

Order No.: 1060

in stock

Powerbox connector male 10pcs

JR servo connector

Order No.: 1050

In stock


PowerboxCrimping tool Professional

Product description

 

in stock

Powerbox Micro Match

The PowerBox MicroMatch is the ideal solution for models where there is no space for a battery backer, or where the backer in use does not include the MicroMatch’s functions.
 

Features Servo-match function on both outputs Servo reverse, accurate adjustment of centre and end-points Programmable using a telephone app (BlueCom) or a PC (USB) Quick reverse function 16-bit processor for high-speed signal processing 4096-step resolution to suit the latest generation of servos Interference suppression and signal amplifier function Ultra-high current capacity: limited only by the plug and socket connection Can be updated using BlueCom or the USB Interface Adapter

Technical Data Operating voltage 4.0V - 9.0V Current drain Power-on state 22mA Maximum load current >10A Signal input PWM Channels 1 Programmable servo outputs 2 Servo signal resolution 4096 Signal frame rate 12ms, 15ms, 18ms, 21ms Dimensions 33 x 10 x 5.5 mm Weight 7.5g Temperature range -30°C to +75°C less

In stock

Powerbox USB Interface Adapter

Manual: http://www.powerbox-systems.com/uploads/tx_pbsdocuments/Terminal_Anleitung_en.pdf

in stock

Muffler set DLE35RA
Complete muffler set include muffler header PTFE tube and clamps.

 

Muffler set DLE55RA
Complete muffler set include muffler header PTFE tube and clamps.
 

in stock

 Pilot rc fuel tank 1000cc include fuel filter klunk and fuel tube
Dimensions: 75x75x185mm
 

---

Optional: 2x Velcro strap 350mm with non slip coating.
 

in stock

pilot rc aluminium servo arm Hitec 24T 40mm lenght
 

in stock

pilot rc aluminium servo arm 25T for Futaba, Savöx, Gforce etc. 40mm lenght

in stock

Features 0.35mm² cross section 30% weight saving only 11g/m fire resistant robust isolation Plugs and sockets mate perfectly Transparent connector system makes it easy to detect errors 2 piece set

in stock

 

Features 0.35mm² cross section 30% weight saving only 11g/m fire resistant robust isolation Plugs and sockets mate perfectly Transparent connector system makes it easy to detect errors 2 piece set

in stock

 

Features 0.35mm² cross section 30% weight saving only 11g/m fire resistant robust isolation Plugs and sockets mate perfectly Transparent connector system makes it easy to detect errors 2 piece set

in stock

 

Features 0.35mm² cross section 30% weight saving only 11g/m fire resistant robust isolation Plugs and sockets mate perfectly Transparent connector system makes it easy to detect errors 2 piece set

 

Technical Data Operating voltage 4.0V - 9.0V Power supply 2S LiPo, 2S LiIon, 2S LiFePo, 5S NiCd/NiMH Current drain Power-on state 56mA Current drain Standby 16µA Maximum load current Peak 2x6A Drop-out voltage 0.3V Output voltage 5.9V or 7.4V regulated Dimensions 60 x 30 x 15 mm Weight 33g Weight Sensor Switch 11g Temperature range -30°C bis +75°C

• double-regulated output voltages for receivers and servos
• Electronic On / Off switch, using the SensorSwitch
• On and Off switching signalled by visual and audible indicators
• Regulated output voltage of 5.9 V or 7.4 V
• LED voltage indicator for each battery separately
• Supports three battery types: LiPo, NiMH / NiCd, LiFePo
• Suppression of any servo feedback currents which might occur
• MPX battery inputs

in stock


Fiala Wooden propeller 18x8 2-blade natural
Propellers designed for gasoline model motors. Propellers are delivered balanced, rating with tarsparent varnic.

 

in stock

Fiala Wooden propeller 20x6 2-blade natural

Propellers designed for gasoline model motors. Propellers are delivered balanced, rating with tarsparent varnic.
 

In stock

Fiala Wooden propeller 20x8 2-blade natural

Propellers designed for gasoline model motors. Propellers are delivered balanced, rating with tarsparent varnic.

in stock

Fiala Wooden propeller 21x8 2-blade natural
Propellers designed for gasoline model motors. Propellers are delivered balanced, rating with tarsparent varnic.

in stock
​​​

Fiala Wooden propeller 22x8 2-blade natural
Propellers designed for gasoline model motors. Propellers are delivered balanced, rating with tarsparent varnic.

in stock

Fiala Wooden propeller 26x10 2-blade natural
Propellers designed for gasoline model motors. Propellers are delivered balanced, rating with tarsparent varnic.

No stock

Fiala Wooden propeller 34x12 2-blade natural
Propellers designed for gasoline model motors. Propellers are delivered balanced, rating with tarsparent varnic.

in stock

Fiala Wooden propeller 15x10 2-blade electro
Propellers designed for electric model motors. Propellers are delivered balanced, rating with tarsparent varnic.
 

in stock

Fiala Wooden propeller 16x10 2-blade electro
Propellers designed for electric model motors. Propellers are delivered balanced, rating with tarsparent varnic.

in stock

Fiala Wooden propeller 17x10 2-blade electro
Propellers designed for electric model motors. Propellers are delivered balanced, rating with tarsparent varnic.

Fiala Wooden propeller 18x8 2-blade electro
Propellers designed for electric model motors. Propellers are delivered balanced, rating with tarsparent varnic.

Fiala Wooden propeller 18x8 2-blade electro
Propellers designed for electric model motors. Propellers are delivered balanced, rating with tarsparent varnic.

Fiala Wooden propeller 24X10 2-blade electro

Propellers designed for electric model motors. Propellers are delivered balanced, rating with tarsparent varnic.

in stock

Fiala Wooden propeller 14x8 2-blade electro
Propellers designed for electric model motors. Propellers are delivered balanced, rating with tarsparent varnic.

in stock

Fiala Exhaust silencer for FM 170B2-FS and FM 210B2-FS

in stock

Powerbox Spare part magnetic sensor   Order No.: 9041

in stock

Fiala Wooden propeller 13x8 2-blade electro

Propellers designed for electric model motors. Propellers are delivered balanced, rating with tarsparent varnic.

No stock

Fiala Wooden propeller 17x12 2-blade electro


Propellers designed for electric model motors. Propellers are delivered balanced, rating with tarsparent varnic.