{"title":"Kleber","description":"","products":[{"product_id":"ca-glue-100g-thin","title":"Sekundenkleber 100 g, dünnflüssig","description":"\u003cp\u003e\u003cspan\u003eLiquid cyanoacrylate adhesive glue \"Joker\" with thin viscosity - within just a few seconds glues metals, glass, wood, rubbers, plastics (small areas), ceramic surfaces, EPP and other materials. Indispensable for typical model-making works with wood, where it quickly creates a strong, tight and durable binder.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePacked in an oval, airtight bottle with an applicator - glue content: 100g.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe thin consistency of cyanoacrylate adhesive makes it easy to apply in harder-to-reach places, penetrating porous surfaces or effectively filling gaps. The volatile and very liquid form of the glue means that it can \"run away\" from the glued surface if it is smooth and non-absorbent, so it should be used on porous materials or allowing the glue to soak into its structure. Application is strongly recommended when the glued surface is levelled horizontally. The thin consistency adhesive is also one of the fastest adhesive (and also the fastest drying) binders on the market - most materials will be permanently glued in just 2-5 seconds.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTo cure and bond the glued surfaces immediately, we recommend to use this glue together with an activator (accelerator) \"Joker\" (available in 200ml spray cans), where after application at the gluing site, it will cure the binder and finish the gluing process.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSafety precautions - CA adhesive bonds instantly human skin (and eyes), is highly toxic, and its vapors are harmful to nasal mucosa. The adhesive should not be used by minors and juvenile modellers, unless under the strict supervision and care of an adult.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIn case of accidental bonding, you may use the special debonder (also available in our shop) that can quickly and effectively neutralize the adhesive.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe durability of the CA glue depends on the storage temperature. After opening, it is reccomended to keep the glue in the refrigerator or other cool place, not exposed to sunlight or other sources of light or heat.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eShelf life depending on storage temperature:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e+ 20 degrees C. - 6 months\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e+ 5 degrees C. - 12 months\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e(this no longer applies to glued surfaces)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNote: CA glue, regardless of its density, is not recommended for gluing paper, foamed polystyrene, depron, lightweight polystyrene foam, delicate fibers (and other textile materials), as well as for use in precision plastic modeling, due to the possibility of melting, unwanted hardening or for very delicate surfaces - deformation of the glued surface.\u003c\/span\u003e\u003c\/p\u003e","brand":"Pilot-RC","offers":[{"title":"Default Title","offer_id":57460949090688,"sku":null,"price":9.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/6954\/5344\/files\/10603_61aabf9a-dc86-4c56-8c66-1be01206f178.jpg?v=1773073123"},{"product_id":"ca-glue-50g-thick","title":"Sekundenkleber 50 g, dickflüssig","description":"\u003cdiv id=\"content\"\u003e\n\u003cdiv id=\"right\"\u003e\u003cform action=\"https:\/\/www.rc-planes.nl\/nl\/cart\/add\/ca-glue-50g-thick\/\" class=\"order\" method=\"post\" id=\"webForm\"\u003e\n\u003cdiv id=\"tabs\" class=\"ui-tabs ui-corner-all ui-widget ui-widget-content\"\u003e\n\u003cdiv id=\"tab-1\" aria-labelledby=\"ui-id-1\" role=\"tabpanel\" class=\"ui-tabs-panel ui-corner-bottom ui-widget-content\" aria-hidden=\"false\"\u003eLiquid cyanoacrylate adhesive glue \"Joker\" with a relatively dense, thick viscosity - within a few to several dozens of seconds glues metals, glass, wood, rubbers, plastics (small areas), ceramic surfaces, EPP and other materials. Indispensable for typical model-making works with wood, where it quickly creates a strong, tight and durable binder.\u003cbr\u003e\u003cbr\u003ePacked in a round, airtight bottle with an applicator - glue content: 50g.\u003cbr\u003e\u003cbr\u003eThanks to thick consistency, the adhesive does not run down the glued surface so fast, and stays in the place of application. This makes it ideal for use in places where it is not possible to lay the glued object horizontally. The thick adhesive binds glued surfaces within a slightly longer time than CA adhesives with a thinner viscosity - so it works well if you need to glue together two bigger surfaces, where after applying the glue in several places, the user will still have several dozen seconds on their proper positioning. When working with wood, it does not penetrate the wood structure so much and remains on its surface, which is helpful when gluing thicker pieces or bigger surfaces together.\u003cbr\u003e\u003cbr\u003eTo cure and bond the glued surfaces immediately, we recommend to use this glue together with an activator (accelerator) \"Joker\" (available in 200ml spray cans), where after application at the gluing site, it will cure the binder and finish the gluing process.\u003cbr\u003e\u003cbr\u003eSafety precautions - CA adhesive bonds instantly human skin (and eyes), is highly toxic, and its vapors are harmful to nasal mucosa. The adhesive should not be used by minors and juvenile modellers, unless under the strict supervision and care of an adult.\u003cbr\u003e\u003cbr\u003eIn case of accidental bonding, you may use the special debonder (also available in our shop) that can quickly and effectively neutralize the adhesive.\u003cbr\u003e\u003cbr\u003eThe durability of the CA glue depends on the storage temperature. After opening, it is reccomended to keep the glue in the refrigerator or other cool place, not exposed to sunlight or other sources of light or heat.\u003cbr\u003e\u003cbr\u003eShelf life depending on storage temperature:\u003cbr\u003e+ 20 degrees C. - 6 months\u003cbr\u003e+ 5 degrees C. - 12 months\u003cbr\u003e(this no longer applies to glued surfaces)\u003cbr\u003e\u003cbr\u003eNote: CA glue, regardless of its density, is not recommended for gluing paper, foamed polystyrene, depron, lightweight polystyrene foam, delicate fibers (and other textile materials), as well as for use in precision plastic modeling, due to the possibility of melting, unwanted hardening or for very delicate surfaces - deformation of the glued\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/form\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Pilot-RC","offers":[{"title":"Default Title","offer_id":57460949156224,"sku":null,"price":5.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/6954\/5344\/files\/10612.jpg?v=1773073041"},{"product_id":"ca-glue-styro-20g","title":"Sekundenkleber Styropor 20 g","description":"\u003cp\u003eCA Glue styro safe\u003c\/p\u003e","brand":"Pilot-RC","offers":[{"title":"Default Title","offer_id":57460949188992,"sku":null,"price":5.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/6954\/5344\/files\/11158.jpg?v=1773072961"},{"product_id":"uhu-glue","title":"UHU POR 40g","description":"\u003cp\u003e\u003cspan\u003eUHU POR 40gr\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"section\"\u003e\n\u003cp class=\"bodytext\"\u003eUHU por is a quick-setting special adhesive for bonding expanded polysterene, e.g. Styropor® also in combination with other materials. It forms an elastic adhesive film which is highly resistant to age, colorless and waterproof.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"table\"\u003e\n\u003ctable class=\"articles\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eContainer\u003c\/th\u003e\n\u003cth class=\"articles-content\"\u003eContent\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"odd\"\u003e\n\u003ctd\u003eTube\u003c\/td\u003e\n\u003ctd class=\"articles-content\"\u003e40g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd class=\"articles-content\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd class=\"articles-content\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"section\"\u003e\n\u003ch3\u003eMaterials\u003c\/h3\u003e\n\u003cp class=\"bodytext\"\u003eGlue expanded Styrofoam® also in combination with other materials, e.g. wood, paper, metal, ceramic, plaster, fabric and various plastics. Also for photos.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"section\"\u003e\n\u003ch3\u003eUse and Handling Instructions\u003c\/h3\u003e\n\u003cp class=\"bodytext\"\u003eApply adhesive to both parts and let dry. Once dry to the touch (after approx. 10 minutes) press together very firmly for a short time being careful not to damage the rigid foam film.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Pilot-RC","offers":[{"title":"Default Title","offer_id":57460974715264,"sku":null,"price":7.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/6954\/5344\/files\/Schermafbeelding_2026-03-31_110957.jpg?v=1774948374"},{"product_id":"ca-glue-50g-thin","title":"Sekundenkleber 50 g, dünn","description":"\u003cp\u003e\u003cspan\u003eLiquid cyanoacrylate adhesive glue \"Joker\" with thin viscosity - within just a few seconds glues metals, glass, wood, rubbers, plastics (small areas), ceramic surfaces, EPP and other materials. Indispensable for typical model-making works with wood, where it quickly creates a strong, tight and durable binder.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePacked in a round, airtight bottle with an applicator - glue content: 50g.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe thin consistency of cyanoacrylate adhesive makes it easy to apply in harder-to-reach places, penetrating porous surfaces or effectively filling gaps. The volatile and very liquid form of the glue means that it can \"run away\" from the glued surface if it is smooth and non-absorbent, so it should be used on porous materials or allowing the glue to soak into its structure. Application is strongly recommended when the glued surface is levelled horizontally. The thin consistency adhesive is also one of the fastest adhesive (and also the fastest drying) binders on the market - most materials will be permanently glued in just 2-5 seconds.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTo cure and bond the glued surfaces immediately, we recommend to use this glue together with an activator (accelerator) \"Joker\" (available in 200ml spray cans), where after application at the gluing site, it will cure the binder and finish the gluing process.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSafety precautions - CA adhesive bonds instantly human skin (and eyes), is highly toxic, and its vapors are harmful to nasal mucosa. The adhesive should not be used by minors and juvenile modellers, unless under the strict supervision and care of an adult.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIn case of accidental bonding, you may use the special debonder (also available in our shop) that can quickly and effectively neutralize the adhesive.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe durability of the CA glue depends on the storage temperature. After opening, it is reccomended to keep the glue in the refrigerator or other cool place, not exposed to sunlight or other sources of light or heat.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eShelf life depending on storage temperature:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e+ 20 degrees C. - 6 months\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e+ 5 degrees C. - 12 months\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e(this no longer applies to glued surfaces)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNote: CA glue, regardless of its density, is not recommended for gluing paper, foamed polystyrene, depron, lightweight polystyrene foam, delicate fibers (and other textile materials), as well as for use in precision plastic modeling, due to the possibility of melting, unwanted hardening or for very delicate surfaces - deformation of the glued surface.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rc Planes","offers":[{"title":"Default Title","offer_id":57476138664320,"sku":null,"price":5.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/6954\/5344\/files\/10602.jpg?v=1773072871"},{"product_id":"ca-glue-50g-medium","title":"Sekundenkleber 50 g mittel","description":"\u003cp\u003e\u003cbr\u003e\u003cspan\u003eLiquid cyanoacrylate adhesive glue \"Joker\" with a medium viscosity - within a few to several seconds glues metals, glass, wood, rubbers, plastics (small areas), ceramic surfaces, EPP and other materials. Indispensable for typical model-making works with wood, where it quickly creates a strong, tight and durable binder.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePacked in a round, airtight bottle with an applicator - glue content: 50g.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDue to the medium consistency, the Joker cyanoacrylate glue becomes an excellent, fast and universal adhesive with a very wide spectrum of applications. It is perfect for both typical model-making as well as for home works, regardless of whether the glued surface is porous or smooth, absorbent or does not allow penetration. After application, part of the adhesive will fill the defect and bonds the gap, while the remaining part will remain on the surface, where it will still be possible to attach another element. In model making applications, medium glue is perfect for EPP foams and for everyday work with balsa and other types of wood.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTo cure and bond the glued surfaces immediately, we recommend to use this glue together with an activator (accelerator) \"Joker\" (available in 200ml spray cans), where after application at the gluing site, it will cure the binder and finish the gluing process.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSafety precautions - CA adhesive bonds instantly human skin (and eyes), is highly toxic, and its vapors are harmful to nasal mucosa. The adhesive should not be used by minors and juvenile modellers, unless under the strict supervision and care of an adult.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIn case of accidental bonding, you may use the special debonder (also available in our shop) that can quickly and effectively neutralize the adhesive.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe durability of the CA glue depends on the storage temperature. After opening, it is reccomended to keep the glue in the refrigerator or other cool place, not exposed to sunlight or other sources of light or heat.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eShelf life depending on storage temperature:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e+ 20 degrees C. - 6 months\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e+ 5 degrees C. - 12 months\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e(this no longer applies to glued surfaces)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNote: CA glue, regardless of its density, is not recommended for gluing paper, foamed polystyrene, depron, lightweight polystyrene foam, delicate fibers (and other textile materials), as well as for use in precision plastic modeling, due to the possibility of melting, unwanted hardening or for very delicate surfaces - deformation of the glued surface.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rc Planes","offers":[{"title":"Default Title","offer_id":57476149707136,"sku":null,"price":5.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/6954\/5344\/files\/10611.jpg?v=1773072823"},{"product_id":"ca-glue-activator-200ml","title":"CA-Klebstoffaktivator 200 ml","description":"","brand":"Rc Planes","offers":[{"title":"Default Title","offer_id":57476154392960,"sku":null,"price":4.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/6954\/5344\/files\/11955.jpg?v=1773072768"},{"product_id":"quick-cure-5min-epoxy-128g-bsi","title":"Schnellhärtendes 5-Minuten-Epoxidharz 128 g BSI","description":"\u003cp\u003eQuik-Cure 5 min cures to a slightly flexible consistency making it ideal for joints that may experience vibration or stress but it shouldn’t be used if the joint will experience extended periods immersed in water.\u003cbr\u003eIt is however safe to use when constructing internal structures inside boats. Full strength is reached in one hour.\u003c\/p\u003e\n\u003cp\u003eApplication chart\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBalsa wood (**)\u003c\/li\u003e\n\u003cli\u003eSoft wood (**)\u003c\/li\u003e\n\u003cli\u003eHard wood (***)\u003c\/li\u003e\n\u003cli\u003eGlass and metal(**)\u003c\/li\u003e\n\u003cli\u003eFiberglass (**)\u003c\/li\u003e\n\u003cli\u003eCeramics (**)\u003c\/li\u003e\n\u003cli\u003eHard plastic (**)\u003c\/li\u003e\n\u003cli\u003eWhite foam (**)\u003c\/li\u003e\n\u003cli\u003eReiforcing (**)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rc Planes","offers":[{"title":"Default Title","offer_id":57476155933056,"sku":null,"price":21.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/6954\/5344\/files\/10379.jpg?v=1773072715"},{"product_id":"ca-glue-100g-medium","title":"Sekundenkleber 100 g, mittel","description":"\u003cp\u003e\u003cspan\u003eLiquid cyanoacrylate adhesive glue \"Joker\" with a medium viscosity - within a few to several seconds glues metals, glass, wood, rubbers, plastics (small areas), ceramic surfaces, EPP and other materials. Indispensable for typical model-making works with wood, where it quickly creates a strong, tight and durable binder.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePacked in a round, airtight bottle with an applicator - glue content: 50g.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDue to the medium consistency, the Joker cyanoacrylate glue becomes an excellent, fast and universal adhesive with a very wide spectrum of applications. It is perfect for both typical model-making as well as for home works, regardless of whether the glued surface is porous or smooth, absorbent or does not allow penetration. After application, part of the adhesive will fill the defect and bonds the gap, while the remaining part will remain on the surface, where it will still be possible to attach another element. In model making applications, medium glue is perfect for EPP foams and for everyday work with balsa and other types of wood.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTo cure and bond the glued surfaces immediately, we recommend to use this glue together with an activator (accelerator) \"Joker\" (available in 200ml spray cans), where after application at the gluing site, it will cure the binder and finish the gluing process.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSafety precautions - CA adhesive bonds instantly human skin (and eyes), is highly toxic, and its vapors are harmful to nasal mucosa. The adhesive should not be used by minors and juvenile modellers, unless under the strict supervision and care of an adult.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIn case of accidental bonding, you may use the special debonder (also available in our shop) that can quickly and effectively neutralize the adhesive.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe durability of the CA glue depends on the storage temperature. After opening, it is reccomended to keep the glue in the refrigerator or other cool place, not exposed to sunlight or other sources of light or heat.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eShelf life depending on storage temperature:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e+ 20 degrees C. - 6 months\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e+ 5 degrees C. - 12 months\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e(this no longer applies to glued surfaces)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNote: CA glue, regardless of its density, is not recommended for gluing paper, foamed polystyrene, depron, lightweight polystyrene foam, delicate fibers (and other textile materials), as well as for use in precision plastic modeling, due to the possibility of melting, unwanted hardening or for very delicate surfaces - deformation of the glued surface.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rc Planes","offers":[{"title":"Default Title","offer_id":57476157145472,"sku":null,"price":9.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/6954\/5344\/files\/12688.jpg?v=1773072637"},{"product_id":"ca-glue-100g-thick","title":"Sekundenkleber 100 g, dickflüssig","description":"\u003cp\u003e\u003cspan\u003eLiquid cyanoacrylate adhesive glue \"Joker\" with thin viscosity - within just a few seconds glues metals, glass, wood, rubbers, plastics (small areas), ceramic surfaces, EPP and other materials. Indispensable for typical model-making works with wood, where it quickly creates a strong, tight and durable binder.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePacked in an oval, airtight bottle with an applicator - glue content: 100g.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe thin consistency of cyanoacrylate adhesive makes it easy to apply in harder-to-reach places, penetrating porous surfaces or effectively filling gaps. The volatile and very liquid form of the glue means that it can \"run away\" from the glued surface if it is smooth and non-absorbent, so it should be used on porous materials or allowing the glue to soak into its structure. Application is strongly recommended when the glued surface is levelled horizontally. The thin consistency adhesive is also one of the fastest adhesive (and also the fastest drying) binders on the market - most materials will be permanently glued in just 2-5 seconds.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTo cure and bond the glued surfaces immediately, we recommend to use this glue together with an activator (accelerator) \"Joker\" (available in 200ml spray cans), where after application at the gluing site, it will cure the binder and finish the gluing process.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSafety precautions - CA adhesive bonds instantly human skin (and eyes), is highly toxic, and its vapors are harmful to nasal mucosa. The adhesive should not be used by minors and juvenile modellers, unless under the strict supervision and care of an adult.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIn case of accidental bonding, you may use the special debonder (also available in our shop) that can quickly and effectively neutralize the adhesive.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe durability of the CA glue depends on the storage temperature. After opening, it is reccomended to keep the glue in the refrigerator or other cool place, not exposed to sunlight or other sources of light or heat.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eShelf life depending on storage temperature:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e+ 20 degrees C. - 6 months\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e+ 5 degrees C. - 12 months\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e(this no longer applies to glued surfaces)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNote: CA glue, regardless of its density, is not recommended for gluing paper, foamed polystyrene, depron, lightweight polystyrene foam, delicate fibers (and other textile materials), as well as for use in precision plastic modeling, due to the possibility of melting, unwanted hardening or for very delicate surfaces - deformation of the glued surface.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rc Planes","offers":[{"title":"Default Title","offer_id":57476157440384,"sku":null,"price":9.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/6954\/5344\/files\/12689.jpg?v=1773072414"},{"product_id":"slow-cure-30min-epoxy-128g-9-oz-bsi","title":"Langsam aushärtendes 30-Minuten-Epoxidharz, 128 g (9 oz), BSI","description":"\u003ch1 itemprop=\"name\"\u003eSlow Cure 30min Epoxy 128g (9 oz) BSI\u003c\/h1\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003eSLOW-CURE™ 30 min. epoxy works best for forming reinforcing fillets on joints.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIt has the highest strength of our epoxies. It is waterproof and more heat resistant. SLOW-CURE™ can be used for bonding if you’re willing to wait overnight.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eFillers such as microballoons can be mixed with SLOW-CURE™ and FINISH-CURE™ to form a putty-like consistency.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSuch fillers will usually decrease the working time by about 25%. Bonded objects can be handled after 8 hours and the cured epoxy reaches full strength within 24 hours.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSLOW-CURE™ 30 min. Epoxy is an equal two-part hobby adhesive that forms high strength bonds through a chemical reaction between the resin and hardener. The cured epoxy is resistant to most chemicals.\u003c\/p\u003e\n\u003cp\u003eSLOW-CURE™ has the highest strength of our epoxies and should be applied in temperatures above 70°F. SLOW-CURE™ maintains it’s strength in both the lowest and highest temperature ranges of our line of epoxies.\u003c\/p\u003e\n\u003cp\u003eSLOW-CURE™ bonds best to clean, textured surfaces. Smooth, non-porous surfaces should be roughened with coarse sandpaper to improve adhesion. Acetone and Isopropyl rubbing alcohol work as the best solvents for cleaning uncured epoxy from surfaces. SLOW-CURE™ works best for forming reinforcing fillets on joints and can be mixed with microballons or other fillers to form putty-like consistency. SLOW-CURE™ is waterproof and forms superior bonds if you’re willing to wait overnight. It has better penetration of porous surfaces for better bonding. Full cure in 6-8 hours.\u003c\/p\u003e","brand":"Rc Planes","offers":[{"title":"Default Title","offer_id":57476162748800,"sku":null,"price":21.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/6954\/5344\/files\/10311.jpg?v=1773072353"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/6954\/5344\/collections\/10603.jpg?v=1773072184","url":"https:\/\/www.rc-planes.nl\/de\/collections\/kleber.oembed","provider":"Rc Planes","version":"1.0","type":"link"}